High-gloss non-marking injection mold temperature machine technology

High-gloss non-marking injection mold temperature machine (abbreviation) Introduction: high-light mold temperature machine

The high-gloss non-marking steam injection mold temperature machine uses high-temperature steam or high-temperature hot water. When the injection molding machine is closed, it is blown into high-temperature steam or high-temperature hot water. First, the mold temperature is raised to a set value, and then the plastic injection molding is started. After the injection molding machine completes the pressure-holding and cooling, the cold water is injected, the mold temperature is quickly lowered to a set value, and the mold is opened, and then the air is blown into the mold to completely blow away the cold water to complete the entire injection molding process. The newly developed high-gloss non-marking injection mold temperature machine of Ode Zui has a high-temperature hot water machine and a freezer, and adds a hot water and cooling water recovery system. The energy saving effect is remarkable and the profit is considerable. This is the advantage of the Oude high-light mold temperature machine . : Zhang Wanli Seamless injection molding

The shortcomings of traditional injection mold temperature control are as follows:

1 can not meet the needs of rapid heating and rapid cooling in high-gloss injection molding.

2 The temperature rise is small, and the weld marks on the surface of the product can only be reduced and cannot be eliminated.

3 The higher the hardness of the plastic, the worse the fluidity. Therefore, with this process, the hardness of the surface of the product can only reach the HB level, which cannot meet the needs of actual use.

4 When the mold heats up, it expands by heat, and when it cools down, it shrinks again, making the clamping force very unstable. It is easy to cause various defects such as product dissatisfaction and high internal stress.

Eter Ward Information System is an indispensable important part in hospital digitization construction, which not only provides the powerful communication among doctors, nurses and patients, but also creatively offers the new functions of voice reminding, information issuing, information collection, information process, and etc. This system has truly achieved a leap of nursing quality besides the greatly decreased of the work intensity of nursing staff.
     
Features of Ward Nursing System:
1. Act as management center that can be linked to PC with WNS software suitable for hospital, where internal communication is needed and is easy to be operated.
2. The Master Host can support 200 extensions (Included bed extension, door extension, bathroom extension); WNS software can record and check patient information.
3.Nurse Extension can broadcast for ward area.
4.Smart Handle have LED night light.
5.Bath Extension can receive the signals of nurse arriving and ward inspection.
6. Door Extension equipped with multicolour door lamp, can indicate different situation by different colour.    

ETR ward nursing system is composed of the integrated host (including operating software), management host, bed extension, smart handle extension, nurse extension, door extension, mobile extension, extra bed extension, bathroom extension, connection extension, corridor display and various extended control devices.