1. Maintaining a wet state The membrane element must be kept in a wet state at all times. Even if it is necessary to temporarily open it in order to confirm the quantity of the same package, it must be carried out without breaking the plastic bag. This state should be saved until use.
2. Storage temperature The membrane element is preferably stored at a low temperature of 5 to 10 °C. Physical damage occurs if freezing occurs, so take insulation measures and do not freeze them.
Avoid direct sunlight when storing in an atmosphere of more than 10 ° C. Choose a well ventilated place. At this time, the storage temperature should not exceed 35 °C.
3. When the stacking layer is saved, the maximum stacking number of the membrane component carton is as follows:
4" membrane element / 1 stick, 6 layers;
4 inch membrane element/10 sticks, 5 layers;
8 inch membrane element / 4 sticks, 5 layers.
In the above stacking, if the carton is damp, its strength will be weakened and collapse may occur, so do not let the crates get wet. Also, do not stand on the cardboard box or place heavy objects on top of the cardboard box.
4, the quality of the membrane element when the 8-inch membrane element / 1 stick, its mass is about 16kg, do not shine when handling. In addition, when you fall, you will be hurt and have feet, so wear protective shoes. |