Product introduction:
The water bath constant temperature oscillator (also a water bath constant temperature shaker) is a temperature-controllable combination of a constant temperature water bath and an oscillator. It is a plant, biology, microbiology, genetics, virus, environmental protection, medical light research and education. And the production department for precision culture preparation of indispensable experimental equipment. Its main features 1 temperature control accuracy, digital display. 2 small waves when oscillating, no spray splash. 3 with mechanical timing. The 4 universal spring bottle holder is especially suitable for the preparation of biological samples for a variety of comparative experiments. 5 stepless speed regulation, smooth operation. Easy and safe to operate. The inner cavity of the 6 cavity is made of stainless steel and has good corrosion resistance.
Instructions for use:
3-1: Use at medium speed in the speed range to extend the life of the instrument.
3-2: The instrument should be placed on a relatively stable workbench. The environment should be kept clean and tidy, ventilated and dry, and convenient for water supply and drainage.
3-3: Before using the instrument, first set the speed control knob to the minimum position and turn off the “power switchâ€.
3-4: Packing the test bottle: 1 Pay attention to the uniform distribution. 2 Note that the amount of liquid should not be too small to prevent the test bottle from floating. 3 Pay attention to sealing the test bottle mouth to prevent the condensed water drops from dripping into the test bottle.
3-5: Inject tap water into the water tank, the water level should be slightly higher than the inner liquid surface of the culture test bottle.
3-6: Turn on the external power supply, set the power switch to the "on" position, and the indicator light is on.
3-7: Temperature control
Press the “SET†button, the digital tube number will start to flash. At this time, you can set the temperature control temperature and press the “∧†or “∨†button to display the digital tube to the desired set temperature. Press the “SET†button again to return to the standard working mode. At this time, the instrument is already heating, and the indicator light starts to flash. When the temperature of the studio has reached the set temperature, the indicator light stops flashing and the automatic temperature is started.
3-8: Select the timing and adjust the timing knob to the “Timed†or “Normally Open†position.
3-9: Turn on the oscillation switch, the indicator light is on, slowly adjust the speed control knob and raise it to the required speed.
3-10: Before each stop, each switch is placed in a non-operating state and the timer is turned OFF.
3-11: It is forbidden to use the heater in the waterless state of the water tank.
4. Maintenance:
Proper use and attention to the maintenance of the instrument, so that it is in good working condition, can extend the life of the instrument. During continuous operation, the instrument should perform a periodic inspection every three months to check for water droplets, falling into the motor and control components.
COVID-19 Antigen Test Cassette (Nasal Swab)
This detection kit applies immunoassay to directly detect the presence of virus and is possible to reach large-scale testing of up to millions of tests one day
COVID-19 Antigen Test Cassette (Nasal Swab)
NINGBO AUTRENDS INTERNATIONAL TRADE CO., LTD , https://www.metests.com