(1) Regularly check the over-temperature safety device to prevent over-temperature. The method is to press the monitoring alarm button, turn the fixing screw until the over-temperature alarm device rings, and then turn off the over-temperature safety light.
(2) The water to be added must be distilled water or non-ionized water to prevent the mineral deposits from corroding in the water tank. Water must be changed every year. Always check if there is enough water in the box.
(3) The tank should be regularly disinfected with disinfectant, and the shelf can be taken out for cleaning and disinfection to prevent other microbial contamination, resulting in failure of the experiment.
(4) If CO2 is not used for a long time, the CO2 switch should be turned off to prevent the CO2 regulator from malfunctioning.
(5) The CO2 used must be pure, otherwise the sensitivity of the CO2 sensor and the pollution of the CO2 filter should be reduced. (6) The incubator should be managed by a special person. Once the switch and adjustment knob on the operation panel are fixed, do not feel free. Wriggle, so as not to affect the temperature inside the box, CO2, humidity fluctuations, while reducing the sensitivity of the machine.
(7) In the incubator without humidity control, in order to keep the CO2 in the tank stable, a water-filled container should be placed in the bottom layer of the tank. There is also a three-gas incubator. This incubator is a new product that is further improved on the basis of a carbon dioxide incubator. The principle is the same as other incubators. It is characterized by not only adding CO2, but also adding nitrogen and oxygen, and all of them are controlled and regulated by various computers. It is mainly used for the reproduction and cultivation of some special microorganisms. It is generally not widely used. At present, it is only produced by a few foreign manufacturers.
Surgical Protective Clothing,Medical Surgical Protective Clothing,Surgical Protective Coverall,Protective Body Suit
Guangdong Jia Mei Biological Technology Co.Ltd , https://www.jaymeimask.com