With the gradual recovery of the weather, the spring plowing season is approaching, and various agricultural machinery will begin to invest in spring plowing. In order to make agricultural machinery efficient, high-quality, low-cost, and safe for the spring plowing production services, agricultural machinery users should pay attention to the following matters when using agricultural machinery:
Before the use of agricultural machinery, the agricultural machinery shall be cleaned, inspected, lubricated, adjusted, tightened, repaired, replaced, etc. in accordance with the requirements of the agricultural machinery operation manual, so as to ensure that the agricultural machinery and equipment are in good technical condition for the spring plowing production operation.
Second, the maintenance of agricultural machinery (such as tractors, cultivators) lubrication system, according to the provisions of the use of standard specifications of the lubricating oil, to strictly abide by the lubrication system maintenance cycle and specifications, regular cleaning lubrication system, regular replacement of filter components to Reduce machine wear.
Third, the spring temperatures are unstable and changeable. Attention should be paid to the correct use of agricultural cooling systems. The first is to continue to do a good job of anti-freezing. When the temperature is lower than 0 degrees at night, the cooling water of the engine should be released to prevent freezing and cracking of the engine body. Second, the engine should be warmed up and started when it is started at a low temperature. Third, the normal temperature of the engine should be used. Up to 40 degrees above empty load
Fourth, the operation, more than 60 degrees to load operation, the normal working temperature should be 80 to 95 degrees to reduce engine wear.
In the operation of agricultural machinery, it is necessary to strictly abide by the operating procedures, so that production can be busy again, safety can not be forgotten; production is no longer urgent, safety first.
The valve is a series of gas emergency shut off solenoid valves, specially designed as gas pipe breaker for emergency use. It can be connected with gas leaking detection sensor, fire alarm circuit or other intelligent sensor modules so that on site or remote shut down on gas supply (manually or automatically) is possible, hence ensuring the safety on gas usage. The valve features an auto-close when strong vibration is detected. After close, manual operation is required to turn on the valve. This feature meets safety regulations in the event of an accident.
Cut Off Valve,Solenoid Control Valve,Solenoid Gas Safety Shut Off Valve,Emergency Gas Shut Off Solenoid Valve
Rictron Industrial Co., Ltd , https://www.szrictron.com