First, read the instructions Before using the stove, read the instructions carefully to prevent misuse of the safety accident and damage the stove.
Second, the stove installation Biogas stove should be placed on the kitchen of porcelain, marble or cement and other non-wood cooking surface, can not be near firewood, clothes, mosquito nets and other flammable items; biogas transmission pipeline should not be too long, especially desulfurization The device cannot be installed above the biogas stove. The installation sequence of the products in the distribution and distribution system is, in order from the digester outlet, are switches, condensers, biogas purifiers (desulfurizers, pressure gauges), tees, switches, biogas stoves, and biogas lamps. Third, to avoid the wind First, because the wind makes the flame swing instability, firepower is not concentrated; Second, when the wind is easy to blow out the flame, may make a large number of biogas leak, resulting in a safety accident. In normal use, it is necessary to keep the air flowing. Do not close the doors and windows.
Fourth, adjust the throttle In the use of biogas stove, pay attention to adjust the air intake on the stove (that is, the throttle), in order to avoid hypoxia. Incomplete combustion of biogas will produce carbon monoxide toxic gases.
V. Scientific Ignition When using a non-electronic or pulsed-fired biogas stove, if its electronic or pulse system malfunctions, it should first ignite the match and other ignitions, and then turn on the biogas switch to ignite. If you first turn on the biogas switch and then light a match such as a match and wait for a long time, the biogas around the biogas stove will increase, which will easily burn the face and hands of the operator, and even cause a fire.
6. When the flame is extinguished in order, turn the knob clockwise until it is initially turned off (“OFFâ€). After hearing a click, turn off the switch on the pipeline before the biogas lamp to prevent air leakage. When you do not use gas, you must turn off the switch on the regulator to prevent air from entering the regulator.
VII. Preventing Leakage Gas Always check the gas pipes of the biogas and the joints and switches of the stove for leaks. The method is to apply a brush or cotton cloth soaked in soapy water to the part to be inspected. If air bubbles constantly occur and the air bubbles increase, the air leakage will occur. At this point, immediately close all valve switches, open the doors and windows to allow the biogas to spontaneously discharge outdoors. If the gas pipeline is broken by rats, aging and rupture, it must be updated. It is also necessary to educate children not to play with fire near the biogas pipeline. The coal pellet furnace should also be kept away from the biogas pipeline to prevent fires.
VIII. When desulfurizers used in desulfurization desulfurizers are used for about 6 months, they must be regenerated. The method is to remove the desulfurizer from the desulfurizer and put it in a ventilated shelter area for 4 to 6 hours. Then, regenerate the desulfurizer into a desulfurizer, tighten the cap, and check for leaks. Desulfurizers can be reused 3 times (6 months each time) under normal conditions.
9. When someone is on duty to use biogas to cook soup or boil water, they should not be overfilled. At the same time, some people must be on duty to avoid the fire being spilled out of the soup or water and leaking biogas to cause safety accidents.
X. Cleanliness Clean the dirt in the fire lid and fire hole once a week. Do not use the pot with dirt on the stove.
Second, the stove installation Biogas stove should be placed on the kitchen of porcelain, marble or cement and other non-wood cooking surface, can not be near firewood, clothes, mosquito nets and other flammable items; biogas transmission pipeline should not be too long, especially desulfurization The device cannot be installed above the biogas stove. The installation sequence of the products in the distribution and distribution system is, in order from the digester outlet, are switches, condensers, biogas purifiers (desulfurizers, pressure gauges), tees, switches, biogas stoves, and biogas lamps. Third, to avoid the wind First, because the wind makes the flame swing instability, firepower is not concentrated; Second, when the wind is easy to blow out the flame, may make a large number of biogas leak, resulting in a safety accident. In normal use, it is necessary to keep the air flowing. Do not close the doors and windows.
Fourth, adjust the throttle In the use of biogas stove, pay attention to adjust the air intake on the stove (that is, the throttle), in order to avoid hypoxia. Incomplete combustion of biogas will produce carbon monoxide toxic gases.
V. Scientific Ignition When using a non-electronic or pulsed-fired biogas stove, if its electronic or pulse system malfunctions, it should first ignite the match and other ignitions, and then turn on the biogas switch to ignite. If you first turn on the biogas switch and then light a match such as a match and wait for a long time, the biogas around the biogas stove will increase, which will easily burn the face and hands of the operator, and even cause a fire.
6. When the flame is extinguished in order, turn the knob clockwise until it is initially turned off (“OFFâ€). After hearing a click, turn off the switch on the pipeline before the biogas lamp to prevent air leakage. When you do not use gas, you must turn off the switch on the regulator to prevent air from entering the regulator.
VII. Preventing Leakage Gas Always check the gas pipes of the biogas and the joints and switches of the stove for leaks. The method is to apply a brush or cotton cloth soaked in soapy water to the part to be inspected. If air bubbles constantly occur and the air bubbles increase, the air leakage will occur. At this point, immediately close all valve switches, open the doors and windows to allow the biogas to spontaneously discharge outdoors. If the gas pipeline is broken by rats, aging and rupture, it must be updated. It is also necessary to educate children not to play with fire near the biogas pipeline. The coal pellet furnace should also be kept away from the biogas pipeline to prevent fires.
VIII. When desulfurizers used in desulfurization desulfurizers are used for about 6 months, they must be regenerated. The method is to remove the desulfurizer from the desulfurizer and put it in a ventilated shelter area for 4 to 6 hours. Then, regenerate the desulfurizer into a desulfurizer, tighten the cap, and check for leaks. Desulfurizers can be reused 3 times (6 months each time) under normal conditions.
9. When someone is on duty to use biogas to cook soup or boil water, they should not be overfilled. At the same time, some people must be on duty to avoid the fire being spilled out of the soup or water and leaking biogas to cause safety accidents.
X. Cleanliness Clean the dirt in the fire lid and fire hole once a week. Do not use the pot with dirt on the stove.
Bambermycin Antibiotics,Bambermycin Granular,Bambermycin Powder,Bambermycin Animal Feed
Shandong Shengli Bioengineering Co., Ltd , https://www.shenglipharm.com